Advanced centrifuges are now available for laboratories to spin liquid samples at high speed for effective separations. Model 614B is a continuous duty centrifuge designed for the small lab or doctor's office for the purposes of separating laboratory fluids. The unit is controlled by a mechanical timer settable from 1 to 30 minutes. With its compact size, this model is ideal for doctor's offices, small clinics, laboratories, and where the specimens are analyzed on site. Using advanced engineering materials and an innovative cooling system, the 614B provides high-quality fixed-angle separations for the physician's office or small lab.
Model 614B can spin six tubes of sizes 0.5mL to 15mL. Its SmartView Platform positions the centrifuge to better display the rotor chamber. It helps users to get a clear view of the loading and unloading of specimens. This platform leaves centrifugation unaffected as centrifugal forces act on the axis of the tubes. By purchasing this fixed-angle centrifuge from an established online lab equipment store, customers can benefit from competitive pricing, timely delivery and superior post-sales support.
Due to the limitations of fixed-angle centrifugation, this 614B centrifuge from Drucker Diagnostics should be used for blood only when centrifuged specimens are not transported to another site for analysis. The system features:
- Fixed-angle rotor for spinning 75 mm, 100 mm and 125 mm test
- Custom tube holders designed to spin tubes without cushions
- Cool-Flow air flow design that prevents overheating of samples
- Heavy gauge steel construction for safety and durability
- Removable rotor for easy cleaning
- Brushless A/C motor
- Clear lid for safe observation of samples and optical calibration of speed
The unit comes with safety features such as safety lid switch that prevents the centrifuge from operating unless the lid is closed and latched, positive lid latching, clear shatter-proof lid, and reinforced side walls. The model is also certified to US, Canadian, and European Safety standards.The manufacturer recommends the centrifuge must be calibrated every 2 years or 5,000 cycles. Also, all surfaces must be dried immediately after cleaning and disinfecting.