For Business Use Only. Does Not Ship to Residential Addresses. For use inside an Analyzer, Sold Separately.
10661 Medica EasyRA Cleaner Kit, 4x30ml
In Stock
Product code: 10661
MPN: 10661
Manufacturer: Medica
Shipping Weight: 2.00lbs (0.91kg)
WHY CHOOSE BLOCK SCIENTIFIC?
See why in 2 mins.
Medica EasyRA Cleaner Kit
Wedges each contain a useable volume of 29 mL of 20% bleach. It is intended for cleaning the probe of the Medica EasyRA Chemistry Analyzer. The cleaner in the wedge is used to clean the probe on a daily basis.
Instructions for Use
The diluted bleach is ready-to-use. Store the Cleaner
wedge closed when not in use, either on-board or in the
refrigerator. It is recommended that the probe be cleaned both at the
beginning of the day, and at the end of the day. Remove
the cap and place the cleaner wedge in the EasyRA
reagent wheel located in the reagent area. Refer to the
EasyRA Operators Manual for detailed instructions on
performing the daily cleaning procedures. The cleaner
wedge should be recapped when not in use.
Instructions for Handling, Storage and Stability
The bleach section of the wedge is ready to use as
supplied.
The unopened cleaner wedge is stable until the expiration
date on the label if stored at 4°–25°C. Once it has been
used on-board, store closed at 2°–8°C for up to 30 days. Avoid prolonged or repeated contact with skin. Do not ingest.
Reagents
wedge: 1% sodium hypochlorite, 29 mL
Stability and Reactivity
| Chemical Stability: | Stable |
| Conditions to avoid: |
Data not available
|
| Incompatibilities with other chemicals: |
Data not available
|
Hazardous Decomposition Products: |
Data not available
|
Hazardous Polymerization:
|
Has not been reported
|
Hazards and Identification
| Appearance and Odor: |
Clear solution
|
| Flashpoint: |
N/A
|
| Vapor Pressure: |
Data not available
|
Specific Gravity:
|
Not Determined
|
Melting Point: | N/A |
Vapor Density: | Not Determined |
Solubility in Water: | Soluble in water |
Toxicological Information
| Chronic Effects: | Data not available |
| Other health hazards: | Data not available |
Safety Measures
First Aid Measures
Inhalation: Provide fresh air. Restore or support breathing. Keep victim warm and quiet. Get medical attention.
Eyes: Flush eyes, including under the eyelids with water for 15 minutes. Get medical attention.
Skin: Flush skin with water for 15 minutes. Wash the affected area thoroughly with soap and water. Remove any contaminated clothing. Get medical attention if irritation develops or persists.
Ingestion: Drink large quantities of water or milk. Do not induce vomiting. Do not give anything by mouth to an unconscious person. Get medical attention.
Accidental Release Measures
Ventilate the area. Absorb spill with inert material (dry sand, vermiculite, absorptive pads, etc.). After absorption, put the material into a container for disposal. Wash the area after material has been removed. Dispose of the material in a way that is consistent with federal, state and local regulation.
Exposure Controls/Personal Protection
- Wear suitable gloves
- Avoid contact with skin and eyes
- Keep unused container tightly closed
Fire Fighting Measures
General Information: Cleaner Kit is not flammable.
Physical and Chemical Properties
| Physical State: | Liquid |
| Appearance: | Clear, light yellow |
| Odor: | Bleach |
PH: | N/A |
Specific Gravity: | N/A |
| Viscosity: | N/A |
| Boiling Point: | N/A |
Freezing/Melting Point: | N/A |
Solubility: | Water-soluble |
Molecular Formula: | NaOCl |
Molecular weight: | N/A |
Related documents
10661 Medica EasyRA Cleaner Kit Material Safety Data Sheet
10661 Medica EasyRA Cleaner Kit Documentation
